I'm making progress on the Rodback chair.
The turnings other than the stretchers are done. This maple is wonderful to turn, and it seems very stable when it's drying. Now that I have the legs tapered, I can measure the stretcher lengths and turn them as well.
The spindles and rod are roughed out, but they're still oversize. The drying rack worked very well, after I put a rack on it to keep the pieces from falling down whenever I bumped it.
I've also drilled and cut the seat. After tapering the leg and post holes, I set this picture up so I could see what the chair will look like when it's done. I think the shape of the post turnings will be fine.
I've started carving the seat, but I need to sharpen one of my spokeshaves and it's giving me trouble. Once that's taken care of, I'll finish the seat and "leg up:" finish the stool half of the chair.
After that, I'll finish the rod and assemble the two posts and the rod to each other. Then I'll finish the spindles, drill the rod, and put the rest of the back together.
1 hour ago